We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
5727400220 (V740-5/2AR-024DC-07) AVENTICS - 5/2-Wegeventil, Serie 740
Part number
5727400220
Description
5/2-Wegeventil, Serie 740 V740-5/2AR-024DC-07 Betätigungelektrisch Nenndurchfluss Qn700 l/min Schaltprinzip5/2 Druckluftanschluss AusgangØ 8x1 Betriebsdruck min.1.5 bar Betriebsdruck max.10 bar Betriebsspannung DC24 V Spannungstoleranz DC-10% / +10% Handhilfsbetätigungnicht rastend, rastend Elektrischer Anschluss TypStecker Elektrischer Anschluss GrößeEN 175301-803, Form A Dichtprinzipweich dichtend Vorsteuerungintern Bauart VentilMembransitzventil Ventilsteckverbindermit Ventilsteckverbinder Drosselmit Drossel AnschlussartRohranschluss Rückstellungmit Luftfederrückstellung VerblockungsprinzipGrundplattenprinzip 1-fach, Scheibenprinzip verblockbarverblockbar Temperaturbeständigkeit-25 °C kältebeständig Umgebungstemperatur min.-25 °C Umgebungstemperatur max.50 °C Mediumstemperatur min.-25 °C Mediumstemperatur max.50 °C
Stock availability:
On request
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle Plate principle |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -25 ... 50 °C |
Medium temperature min./max. | -25 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Connector standard | EN 175301-803:2006 |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Typ. switch-on time | 17 ms |
Typ. switch-off time | 24 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. |
Material |
---|
Housing | Polyarylamide Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |