GEFRAN 10240

The Ethernet communication module with Profinet protocol is available for models GFX4/GFXTERMO4/GFX4-IR/GFW and is housed in various cases. You can order the communication module separately and insert it inside an existing controller. The device acquires the new configuration automatically. The module is equipped with two communication channels: The Ethernet channel with Profinet slave protocol, which allows the connection to a Profinet Master, is equipped with two RJ45 ports for a practical In-OUT daisy chain connection to other modules in the network. A serial communication channel (in insulated RS485, with Modbus RTU protocol), which connects a subnetwork of maximum three devices of the same series to read/write data on several Controllers via Profinet Master, with a &ldquo,cost effective&rdquo, solution. The Profinet communication module CANNOT be inserted in GFX4 / GFXTERMO4 / GFX4-IR products equipped with option 4 auxiliary inputs (mV/TC Aux). We recommend referring to the Data Sheet, which can be downloaded from the links in this page, to choose the Profinet communication option based on the required performance and Power Controller series.
&ldquo,E4&rdquo, Option

• Profinet IO - Modbus Master RTU
• Two Ethernet RJ45 ports: Eth 0 & Eth 1 with internal switch
• Auto-crossover, Data Transport Layer Ethernet II, IEEE 802.3
• DCP Discovery and Configuration Protocol
• Available for GFX4/GFX4-IR/GFW
• PI consortium certificate for GFX4-IR
• Internal installation

&ldquo,E6&rdquo, option

• Profinet IO - Modbus Master RTU
• Two Ethernet RJ45 ports: Eth 0 & Eth 1 with internal switch
• Auto-crossover, Data Transport Layer Ethernet II, IEEE 802.3
• DCP Discovery and Configuration Protocol
• Media Redundancy Protocol client (Bumpless type)
• Fast Forwarding
• Dynamic Frame Packaging
• Available for GFW
• PI consortium certificate for GFW
• Internal installation