We are not the manufacturer, authorised distributor or authorised representative of the LABOM brand in Saudi Arabia. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
LABOM
Country
Germany
Part number
CA2110-A1091-H11-T30-K2085-K137-HY-P9-W1020-W1223-W2002
Description
CA2110 PRESSURE TRANSMITTER UNIVERSAL CA for diaphragm seal operation, hygienic see data sheet D4-018-12 A1 pressure sensor: piezoresistive for gauge pressure 091 measuring range -1...9 bar, overload limit 100 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span H11 output signal: 4...20 mA, 2-wire technology T30 electrical connection: circular connector M12x1 (4 pin) K2085 design: with temperature decoupler K137 process connection: Tri-Clamp, DN 1 1/2" / PN 25 material stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm P9 process temperature: see below max. -20...+160°C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1223 INSPECTION CERTIFICATE DIN EN 10204 3.1 roughness height rating Ra W2002 CALIBRATION PROTOCOL: with 5 measuring points # Please note: R88 (electr. connection steplessly rotatable approx. 300°) was discontinued some time ago. # Custom-Tariff-No.: 90262020
Stock availability:
On request