Wenglor CP70QXVT80

• CMOS line array
• Highly accurate switching distance
• Minimal switching hysteresis
• Switching point independent of material, color and brightness

These sensors work with a high-resolution CMOS line and DSP technology and determine distance using angular measurement. As a result, material, color and brightness related switching point differences are virtually eliminated. Two independent switching outputs are available, at which two switching thresholds and one on or off-delay time (in 10 ms steps) can be configured. Sensor functions can be activated, and scanning results can be acquired via the RS-232 interface.

Range	660 mm
Adjustable Range	60...660 mm
Switching Hysteresis	< 1 %
Light Source	Laser (red)
Wavelength	655 nm
Service Life (T = +25 °C)	100000 h
Laser Class (EN 60825-1)	2
Max. Ambient Light	10000 Lux
Light Spot Diameter	see Table 1

Electrical Data

Supply Voltage	10...30 V DC
Current Consumption (Ub = 24 V)	< 50 mA
Switching Frequency	250 Hz
Response Time	< 2 ms
On-/Off-Delay (RS-232)	0...1 s
Temperature Drift	< 50 µm/K
Temperature Range	-25...60 °C
Number of Switching Outputs	2
Switching Output Voltage Drop	< 1,5 V
Switching Output/Switching Current	200 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Teach Mode	HT, VT, TP
Baud Rate	38400 Bd
Protection Class	III
FDA Accession Number	0820587-000

Mechanical Data

Setting Method	Teach-In
Housing Material	Plastic
Degree of Protection	IP67
Connection	M12 ? 1, 8-pin

Output

Error Output	yes
Configurable as PNP/NPN/Push-Pull	yes
Switchable to NC/NO	yes
RS-232 Interface	yes